Tripp Lite USA-19HS Owner's Manual for Windows v3.4 USA-19HS USB Serial Adapte - Page 6
Configuring Your Serial Device, Connecting Your Serial Device Hardware, Step 1 - serial adapter
View all Tripp Lite USA-19HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Keyspan:USB Serial Adapter for Windows-v3.4 Manual 4.1 - Configuring Your Serial Device Prior to using your serial device (modem,UPS, etc.) with the Keyspan USB Serial Adapter, you must: 1. connect your serial device (hardware) to the Keyspan port 2. configure your serial device's software to use the Keyspan port The following instructions provide a general overview of this process however we do provide specific configuration instructions for certain serial devices. For a list of these examples, please read the Configuration Examples for Windows Appendix in this manual. Connecting Your Serial Device (Hardware) If your Keyspan adapter is not connected, please do so NOW. Step 1 - Connect Your Serial Device To The Keyspan Adapter Attach your serial device's (ie Palm cradle, GPS, cell phone) serial cable to the serial port on your Keyspan USB Serial Adapter. Step 2 - Determine Which Keyspan Port Your Serial Device Is Connected To If your have a Keyspan product that has more than one serial port, please note which Keyspan serial port your serial device is connected to (the serial port on the Keyspan product, not your USB ports on your computer or USB hub). This information will become useful as we start Configuring Your Serial Device's Software. Configuring Your Serial Device's Software The following configuration instructions provide a basic overview of how to configure your software to use your Keyspan serial port(s). For specific instructions on how to operate your serial device, please refer to your serial device's user's manual for detailed instructions... (continued on next page...) Rev 03jul13 This User Manual applies to the Keyspan USB Serial Adapter Software for Windows. Page 6