Uniden 1660 English Owners Manual - Page 5

PAGE 8 BASIC PROGRAMMING (cont.) PROGRAMMING DIALING MODE 1 Press PRG. 2 Press v or w until "Dialing Mode" displays. 3 Press "#" to toggle among the settings. 4 When the desired setting is displayed, press OFF or PRG to end the programming session OR press v or w to advance to another programming step. NOTE: s Dialing Mode is a universal setting. When the mode is changed on any handset or the base, the setting is changed for the entire system. PROGRAMMING LINE IN USE DETECTION (LIU DETECT) The unit can be programmed to detect whether the line is properly connected, and to display when the line is being used. For most users, this feature should be programmed to "On". If you are connecting the unit to a PBX system or if you live in an area prone to line voltage irregularities, you may want to turn this feature "Off". When LIU is set to "On", line-in-use status will be displayed as follows: On handset - L1 icon will display when the line is in use. On base unit - Base LED will flash when the line is in use. To program Line In Use Detection: 1 Press PRG. 2 Press v or w until "LIU Detect" displays. 3 Press "#" to toggle between "On" and "Off". 4 When the desired setting is displayed, press OFF or PRG to end the programming session OR press v or w to advance to another programming step. NOTE: s LIU Detect is a universal setting. When the mode is changed on any handset, the setting is changed for the entire system. PAGE 9 PRIVACY The Privacy setting is only necessary if the handset is used with a 2-Line multiple handset system. This setting is not necessary when using the system. Regardless of whether Privacy is programmed to "On" or "Off", the unit's operation will not be affected. PROGRAMMING THE RINGER LEVEL Select between three volume levels for the handset's ringer. 1 Press PRG. 2 Press v or w until "Ring Level" displays. 3 Press "#" to toggle among the settings Low/Mid/Hi. 4 When the desired setting is displayed, press OFF or PRG to end the programming session OR press v or w to advance to another programming step. RESETTING THE HANDSET At any time, you may reset a handset to return to the factory default settings. Please note that this action will completely restore the handset to its factory programmed settings. Resetting the handset will NOT reset the universal settings or the stored information (such as Caller ID records) contained in the base unit. 1 Press PRG. 2 Press v or w until "Reset ?" displays. 3 Press PRG again to complete the reset. You will hear a beep to confirm that the reset process has been initiated. The LCD will display: PRG OK! Resetting 4 After 15 seconds, the handset will return to standby mode. NOTE: s Make sure to set the Handset I.D. and Security Code after resetting the handset. Each handset has the same default Handset I.D. of station 11. If more than one handset has the same Handset I.D., the system will not function properly.