Uniden BC-RH96 English Owners Manual - Page 12

Data Port Cable — Firmware Updates, BC-RH96, Connections

Get Uniden BC-RH96 PDF manuals and user guides View all Uniden BC-RH96 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

the guides to keep the cable correctly positioned. Then, route the remainder of the cable toward the location of your target scanner. When doing so, be sure to avoid sharp metal edges of your vehicle's body, or other possible hazards. Be sure the cable does not interfere with controls, operation of the vehicle, or passenger safety. Insert the cable's special connector in the front port of the BCT15/BCD996T mobile scanner, or the side port of the BR330T/BCD396T handy scanner. Data Port Cable - Firmware Updates The Remote Head has a data port (see BC-RH96 Connections)so you can update the firmware using the data transfer cable provided with your scanner. Con- nect the data transfer cable to this port on the bottom of the Remote Head. Connect the other end to the DB9 serial port on your PC. This is the only purpose of this connection. Important: For best operation, be sure your scanner always has the latest firmware. Visit www.uniden.com to verify that your scanner has the most up-to-date firmware. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
1±
the guides to keep the cable correctly positioned. Then,
route the remainder of the cable toward the location of
your target scanner. When doing so, be sure to avoid
sharp metal edges of your vehicle’s body, or other
possible hazards. Be sure the cable does not interfere
with controls, operation of the vehicle, or passenger
safety. Insert the cable’s special connector in the front
port of the BCT15/BCD996T mobile scanner, or the
side port of the BR330T/BCD396T handy scanner.
Data Port Cable — Firmware Updates
The Remote Head has a data port (see
BC-RH96
Connections
)so you can update the firmware using the
data transfer cable provided with your scanner. Con-
nect the data transfer cable to this port on the bottom
of the Remote Head. Connect the other end to the DB9
serial port on your PC. This is the only purpose of this
connection.
Important:
For best operation, be sure your scanner always has the
latest firmware. Visit www.uniden.com to verify that
your scanner has the most up-to-date firmware.