Uniden BC60XLT English Owners Manual - Page 14
Recheck frequency. - how to program
 |
UPC - 050633052631
View all Uniden BC60XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
4. Recheck frequency. The frequency appears one digit at a time in sequence. Repeat these steps to program each channel. You can program the same frequency into two or more channels, if desired. Channels with no frequency programmed are skipped during scanning. After programming your scanner, record the frequencies in the table below (or another convenient place) so you can easily reprogram the scanner in case the memory is accidentally erased. Use pencil so you can change your entries at a later date. Channel 1 2 3 4 5 6 7 8 9 10 Frequency Notes 11
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
4. Recheck frequency.
The frequency appears
one digit at a time in
sequence.
Repeat these steps to program each channel.
You can program the same frequency into two or more
channels, if desired.
Channels with no frequency programmed are skipped during
scanning.
After programming your scanner, record the frequencies in the
table below (or another convenient place) so you can easily
reprogram the scanner in case the memory is accidentally
erased. Use pencil so you can change your entries at a later
date.
Channel
Frequency
Notes
1
2
3
4
5
6
7
8
9
10
11