Uniden BC60XLT English Owners Manual - Page 16
Setting the Squelch, Scanning Programmed Channels - programming
 |
UPC - 050633052631
View all Uniden BC60XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting the Squelch 1. Turn until hiss heard. This action lowers the "squelch gate," allowing all signals and noise to get through. No signal should be present when adjusting squelch. Scanner doesn't scan with squelch open. 2. Turn just until hiss stops. This action raises the "squelch gate," allowing only strong signals to get through. Scanner should begin scanning after two seconds. Note: You must have at least one channel programmed before the BC60XLT will scan. Scanning Programmed Channels Turn the scanner on. Channel numbers advance rapidly. Note: When you turn the scanner on, it will always be in Scan mode. 13
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
Setting the Squelch
1. Turn until hiss heard.
This action lowers the
“squelch gate,” allowing
all signals and noise to
get through.
No signal should be
present when adjusting
squelch.
Scanner doesn’t scan
with squelch open.
2. Turn just until hiss stops.
This action raises the
“squelch gate,” allowing
only strong signals to get
through.
Scanner should begin
scanning after two
seconds.
Note:
You must have at
least one channel
programmed before the
BC60XLT
will scan.
Scanning Programmed Channels
Turn the scanner on.
Channel numbers
advance rapidly.
Note:
When you turn the
scanner on, it will always
be in Scan mode.
13