Uniden BC75XLT English Owner's Manual - Page 25
Ni-MH, Charging the Ni-MH Batteries through USB Connection - ac adapter
View all Uniden BC75XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
1. Make sure the power is turned off. 2. Slide the battery compartment cover off. 3. Use a pointed object such as a ballpoint pen to set the battery selection switch inside the compartment to Ni-MH. 4. Install two batteries in the compartment as indicated by the polarity symbols (+ and -) marked inside the battery compartment. 5. Replace the battery compartment cover. Note: To prevent damage to Ni-MH batteries, never charge them in an area where the temperature is above 113°F (45°C) or below 40°F (4°C). Charging the Ni-MH Batteries through USB Connection The scanner has a built-in circuit to charge the Ni-MH batteries when a USB cable connects it to a computer (NOT to a USB hub) or to an AC or DC adapter that provides USB charging power. Verify that the battery selection switch is set to Ni-MH and that only Ni-MH rechargeable batteries are inserted in the scanner before connecting it to your computer. Caution: Never attempt to charge non-rechargeable batteries or install non-rechargeable batteries when the battery selection switch is set to Ni-MH. 1. Be sure the scanner is turned off. It will recharge only if it is turned off, even with the USB cable connecting it to a computer. 2. Connect the included USB cable to the scanner's USB port. 25