Uniden BC95XLT English Owners Manual - Page 33
Operation
UPC - 050633650516
View all Uniden BC95XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Operation OTuprenriantgionOn The Scanner and Setting Squelch Note: Make sure the scanner's antenna is connected before you turn it on. 1. Turn Squelch fully counterclockwise. 2. Press and hold for about 2 seconds to turn the scanner on, then turn Volume clockwise until you hear a hissing sound. 3. If the scanner is scanning, press Hold to stop scanning, then turn Squelch clockwise until the hissing stops. Storing Known Frequencies Into Channels 1. Press Hold. Then enter the channel number where you want to store a frequency, then press Func and Pgm. The channel number appears. 2. Use the number keys and to enter the frequency (including the decimal point) you want to store. 3. Press E to store the frequency into the channel. Notes: • If you entered an invalid frequency in Step 2, Error appears and the scanner beeps three times. Enter a valid frequency. • The scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475. • When you enter a frequency into a channel, the scanner automatically turns on the delay function and DLY appears. When delay is turned on, the scanner automatically pauses scanning Operation 33