Uniden BC95XLT English Owners Manual - Page 43
Storing Frequencies Found During, Chain Search into Channel Memory, Program Band Select Mode - programming directions
UPC - 050633650516
View all Uniden BC95XLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
To start chain search hold mode, press Hold in chain search mode. The scanner stops searching and HOLD appears. In this mode, pressing Func + changes the search direction downward and pressing Func + changes the search direction upward. or appears according to the current search direction. Storing Frequencies Found During Chain Search into Channel Memory You can store frequencies you find in chain search mode or chain search hold mode. 1. Press Func + Pgm in chain search mode or chain search hold mode. The lowest blank channel and bank appear. 2. Press E to store the frequency into the blank channel. To select another channel, press Func + or Func + before you press E. You can also press 0-9 to select the bank. If you try to save a frequency that is already stored, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press . To enter the frequency anyway, press E to accept. The scanner sets itself to program mode after you store a frequency. Program Band Select Mode You can use this mode to define the search range used during a chain search in each search bank. To set the scanner to program band select mode, press Func and PSrc. SRCH appears. Then select a search bank. Special Features 43