Uniden BEARTRACKER 885 English Owners Manual - Page 12

Installation

Get Uniden BEARTRACKER 885 PDF manuals and user guides View all Uniden BEARTRACKER 885 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

24. PTT: Push-to-Talk. Push microphone button. 24 INSTALLATION MOBILE INSTALLATION Safety Notice The antenna used for this radio must be properly installed and maintained. It must provide a separation distance of at least 16.92 inches (43 cm) from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. Never transmit if any person is closer than the specified distance to the antenna. Note that Uniden does not specify or supply any CB antenna with this transceiver. While a 0 dBi gain antenna is normal for a typical installation, the above limit applies to any antenna with up to 3 dBi gain. Plan the location of the transceiver and microphone bracket before beginning installation. 1. Select a location that is convenient for operating the radio but does not interfere with the driver or passenger. 2. Install bracket with self-tapping screws provided. 3. Connect the power cords, antennas, and GPS module (included). 4. Attach the microphone bracket to side of the radio or car dash. Hang the microphone in the bracket. 5. Insert radio into the bracket and secure it with the included knobs. E-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
E-12
24.
PTT
:
Push-to-Talk. Push microphone button.
24
INSTALLATION
MOBILE INSTALLATION
Safety Notice
The antenna used for this radio must be properly installed and
maintained. It must provide a separation distance of at least 16.92 inches
(43 cm) from all persons and must not be collocated or operated in
conjunction with any other antenna or transmitter.
Never transmit if any
person is closer than the specified distance to the antenna.
Note that Uniden does not specify or supply any CB antenna with this
transceiver. While a 0 dBi gain antenna is normal for a typical installation,
the above limit applies to any antenna with up to 3 dBi gain.
Plan the location of the transceiver and microphone bracket
before beginning installation.
1.
Select a location that is convenient for operating the radio but
does not interfere with the driver or passenger.
2.
Install bracket with self-tapping screws provided.
3.
Connect the power cords, antennas, and GPS module (included).
4.
Attach the microphone bracket to side of the radio or car dash.
Hang the microphone in the bracket.
5.
Insert radio into the bracket and secure it with the included
knobs.