Uniden UBR243 User Guide - Page 38
Using The Intercom, Camera Pairing
View all Uniden UBR243 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
1. To control the lullabies from the monitor, decide which camera you want to play lullabies and make it the full screen live view camera. 2. Press LULLABY PLAY/STOP on the monitor or camera. The system plays Lullaby #1 then repeats it. 3. Press LULLABY SKIP to skip to Lullaby #2. The system plays Lullaby #2 then repeats it. 4. Press LULLABY SKIP to skip to Lullaby #3. The system plays Lullaby #3 then repeats it. 5. Press LULLABY SKIP to skip to Lullaby #4. The system plays Lullaby #4 then repeats it. 6. Press LULLABY SKIP to skip to Lullaby #1. The system plays Lullaby #1 then cycles through all lullabies. 7. Press ▲Vol and ▼Vol on the monitor or camera to adjust the volume. Press ▼Vol all the way down on the monitor to mute the lullaby playing through the monitor. USING THE INTERCOM The Intercom feature lets you talk to whomever is within camera range. 1. Decide which camera you want to establish an intercom link with, and make it the full screen live view camera. 2. Press and hold TALK the monitor. 3. Speak clearly into the microphone. 4. Release TALK to listen to the response. CAMERA PAIRING The system comes with one camera that has already been paired. It will communicate with the monitor when it is powered on. The pairing function lets you add up to 3 additional cameras to your system. It also lets you re-pair your first camera if needed. Pair the cameras to the monitor before mounting the cameras. 1. Verify that the monitor is powered on (see page 11). 2. Install and power on the accessory cameras according to the procedures beginning on page 9. 38