Uniden UDR744 English Owner's Manual - Page 10

Set Up The Hardware - outdoor cameras

Get Uniden UDR744 PDF manuals and user guides View all Uniden UDR744 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

No. What it is 7 PIR Sensor: Detects motion in front of the lens and emits detection signal to transmitter. 8 Speaker: Produces the sound transmitted from the receiver. 9 Adjustment screws: Adjusts the camera up/down and clockwise/counterclockwise. SET UP THE HARDWARE MONITOR 1. Flip out the stand on the back of the monitor, and position the antenna. 2. Connect an AC adapter to the power input on the side of the monitor. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet. 3. Press and hold the POWER button on the top of the monitor for 3 - 4 seconds to power it up. 4. The monitor displays the Uniden Guardian screen for a few seconds and then transitions to the LIVE view. The screen remains dark until the cameras are powered up. CAMERA General The UDR744 cameras included with your monitor are weatherproof and have an IP65 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be submerged. Although the cameras can be exposed directly to the rain, it is recommended that, if they are used outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared LEDs used for night vision, thus causing lower quality video. Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth. Placement Considerations Consider the following when placing cameras: 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
10
No.
What it is
7
PIR Sensor: Detects motion in front of the lens and emits detection signal to transmitter.
8
Speaker: Produces the sound transmitted from the receiver.
9
Adjustment screws: Adjusts the camera up/down and clockwise/counterclockwise.
SET UP THE HARDWARE
MONITOR
1.
Flip out the stand on the back of the monitor,
and position the antenna.
2.
Connect an AC adapter to the power input on the side of the monitor.
Connect the other end
of the adapter to a 120 volt AC (standard indoor) power outlet.
3.
Press and hold the
POWER
button on the top of the monitor for 3 - 4 seconds to power it up.
4.
The monitor displays the
Uniden
Guardian
screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the cameras are powered up.
CAMERA
General
The UDR744 cameras included with your monitor are weatherproof and have an IP65 rating. Water
can be sprayed on them and they will still work; however, the cameras cannot be submerged.
Although the cameras can be exposed directly to the rain, it is recommended that, if they are used
outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater
drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared
LEDs used for night vision, thus causing lower quality video.
Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the
infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.
Placement Considerations
Consider the following when placing cameras: