Uniden UM385 Owner s Manual - Page 37
Channel Up, Channel Down
View all Uniden UM385 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Time Date Course Latitude Longitude Status 16 06/20 11:00:00 208o 30. 0 KT 35o 40. 610 N 139o 46. 564 E GPS Data: External Current channel Speed If the GPS does not send coordinates within 30 minutes, an audible alert sounds once and the display shows Input GPS. This message remains until the coordinates are updated. After 4 hours, the audible alert sounds again if no coordinates are received and the GPS is connected. After 23.5 hours, the radio deletes the current coordinates and displays Input GPS. See page 19 to manually set the GPS coordinates. Configuring the GPS If the radio is receiving valid GPS data, it will automatically set the clock to your local time based on the GPS location. You can adjust your local time forward or back one hour if necessary (for example, if you are close to the border of a time zone); you can also adjust for Daylight Savings Time. Follow the steps below to adjust the time: CALL ENT 1W/25W ENT 1W/25W ENT 1W/25W 1. Display the normal menu and choose the Setup sub-menu. 2. Select GPS Setup and then choose Time Adjust. 3. The display shows your current local time. To adjust the time forward one hour, use CHANNEL UP. To adjust the time back one hour, use CHANNEL DOWN button. Press ENT-1W/25W button when you are finished. 4. The display prompts you to confirm the setting: choose Set to save the new time or Cancel to exit time setup without saving. The radio returns to the GPS Setup menu. 5. If your local area observes Daylight Savings Time, choose Daylight Save and press the ENT-1W/25W button. 6. If Daylight Savings Time is currently in effect, select On. If Daylight Savings Time is not currently in effect, select Off. 7. Press ENT-1W/25W. The radio activates the new time setting and returns to the GPS Setup menu. 31