Uniden UM415 English Owners Manual - Page 29

If you want to send a test call to a station that is not in your directory, select Manual. The radio prompts you to enter the MMSI number you want to call. Enter the MMSI number the same way you enter directory entries (see page 22). Enter all nine digits and press ENT-1W/25W button. 4. The radio displays the MMSI number you are about to call and asks you to confirm. If you want to call the displayed number, select Send. To cancel the call, select Cancel. 5. The radio automatically switches to channel 70 to transmit the test call request, then switches back to the last-used Test 123456789 Send Cancel 16 channel. 6. When the other station acknowledges the test call, the radio Back[CLR] Select[ENT] displays an acknowledgement screen. 16 Test Acknowledged 123456789 Completed Back[CLR] Receiving Test Calls When another station sends you a test call, the radio displays the test request screen. To acknowledge the test call, select Reply. To reject the test call, select Cancel. Enabling automatic test call reply If you want the radio to automatically reply to all test call, you can enable automatic test call reply. 16 Test 123456789 Reply Cancel Back[CLR] Select[ENT] 1. Press and hold CALL-MENU to display the normal menu. 2. Select Setup and then Test Reply. 3. Choose Auto and press ENT-1W/25W. The radio will automatically send an acknowledgement when it receives a test call. Press and hold - Setup Test Reply Test Reply Auto Manual 16 Back[CLR] Select[ENT] 4. To disable automatic test call reply, repeat the steps above and select Manual. Position Request and Reply Requesting another station's position (POS Request) Anytime you need to know where another boat currently is-to find your boating partners, to respond to a request for assistance, etc.-you can send a position request to their radio: 1. Press CALL-MENU to display the call menu. English 29