Vantec NST-375LX-BK User Guide - Page 10
Windows ME/XP/2000, Mac OS
View all Vantec NST-375LX-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting the NexStar LX to your computer via network: 1) If you have the USB cable connected, disconnect it. 2) Connect the power cable to the NexStar LX and plug the cable into an available outlet. 3) Connect the NexStar LX to the network using a straight through patch cable. 4) Turn on the NexStar LX via the power switch. 5.2. Logging in to the NexStar LX: 1) Windows ME/XP/2000 Open your browser and type STORAGE or if connected directly to your computer type 169.254.0.1. If you have more than one device connected at the same time, type STORAGE-xxxx, whereas the xxxx stands for the last four digits of your Mac address as seen on the bottom of your device (example STORAGE-2343). Mac OS Open your Terminal and type "nmblookup STORAGE", copy the corresponding IP address and paste it into your browser or if the LAN disk is connected directly to your computer, type 169.254.0.1 into your browser. If you have more than one device connected at the same time, type "nmblookup STORAGE-xxxx, whereas the xxxx stands for the last four digits of your Mac address as seen on the bottom of your device (example STORAGE-2343). 2) A pop-up dialog box will appear prompting you for your username and password. Default Settings: Username: admin Password: admin We strongly suggest you to change this, as soon as you are logged in, to prevent unauthorized access. If you forgot your personal login, press and hold the reset button, turn on the device and wait for ten seconds before releasing it. This will reset the device to its factory default setting. Installation 8