Vantec NST-475LX-BK User Guide - Page 29
Upgrading firmware
View all Vantec NST-475LX-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
13. Maintenance Page On the maintenance page, you are able to do Firmware Upgrades, preform a System Reboot and restore Factory Defaults. ( Figure 13.1-A ) ( Figure 13.1-A ) 13.1 Upgrading firmware (1) Click "Browse" and locate the firmware file. When the firmware file is selected click "Open". (Figure 13.1-B) ( Figure 13.1-B ) (2) Check to make sure the file and pathway of the firmware file is correct. If everything is correct, click "Upload". ( Figure 13.1-C ) ( Figure 13.1-C ) (3) When the upgrade of the firmware is complete, click on "OK". Preform a power cycle of the NAS by powering off and on the NAS. ( Figure 13.1-D ) ( Figure 13.1-D ) Maintenance Page 27
On the maintenance page, you are able to
do Firmware Upgrades, preform a System
Reboot and restore Factory Defaults.
( Figure 13.1-A )
(2) Check to make sure the file and pathway
of the firmware file is correct. If everything
is correct, click "Upload".
( Figure 13.1-C )
(3) When the upgrade of the firmware is
complete, click on "OK". Preform a power
cycle of the NAS by powering off and on
the NAS.
( Figure 13.1-D )
13. Maintenance Page
( Figure 13.1-B )
( Figure 13.1-C )
( Figure 13.1-D )
27
Maintenance Page
( Figure 13.1-A )
(1) Click "Browse" and locate the firmware
file. When the firmware file is selected
click "Open".
(Figure 13.1-B)
13.1
Upgrading firmware