ViewSonic LS700-4K User Guide - Page 32
Use Advanced settings (in signal source mode), Setting, Advanced, Enter
![]() |
View all ViewSonic LS700-4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Use Advanced settings (in signal source mode) When connected to the signal source 1. Press the [Setting] key on the remote control and enter the menu. Then press the / key and select "Advanced" then press the [Enter] key. 2. Press the / key to select the function table. 3. Press the / key, and enter the sub-function table / adjust and set. 4. Press the [Exit] key and return to the previous function table or quit. 25
![](/manual_guide/products/viewsonic-ls7004k-user-guide-905c5eb/32.png)
25
Use Advanced settings
(in signal source mode)
When connected to the signal source
1. Press the [
Setting
] key on the remote control and enter the menu. Then press the
/
key and select “
Advanced
” then press the [
Enter
] key.
2. Press the
/
key to select the function table.
3. Press the
/
key, and enter the sub-function table / adjust and set.
4. Press the [
Exit
] key and return to the previous function table or quit.