ViewSonic LS700-4K User Guide - Page 52
Using the projector under standby mode, Support PJLink™, SNMP, AMX and Xpanel formats
View all ViewSonic LS700-4K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4. Press "Contact IT Help" button, and then a HELP DESK window will be displayed in the upper right corner of the screen. You can send information to the RoomView™ software administrator / user connected to the same local area network. For details, please access http://www.crestron.com and http://www.crestron.com/ getroomview. **Crestron RoomView On the "Edit Room" page, input the IP address (or the host name) as the content displayed in the screen display menu of the projector, and input "02" as the IPID, and input "41794" as the reserved Crestron control port. Regarding the Crestron RoomView™ settings and command method, please access the following website to obtain the RoomView™ User Guide and more information: http://www.crestron.com/products/roomview_connected_embedded_projectors_ devices/resources.asp Support PJLink™, SNMP, AMX and Xpanel formats This projector is compatible with PJLink™, SNMP V.1, AMX or Xpanel V1.10. For details, please respectively refer to the User Guide or access the website to control and manage the projector. Using the projector under standby mode A number of projector functions can be used under Standby Mode (plugged in to power but not switched on). To use those functions, please confirm the cables and wires have been correctly connected. Refer to the chapter on cable connections for more information on cable connections. LAN control The setting in the Network Settings > Wired LAN > Standby LAN Control menu drives the projector to provide network functions in the standby mode. For details, please refer to "Control the projector through the local area network". 45