ViewSonic M1 User Guide - Page 15
Power On/Off, Using power cord
View all ViewSonic M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Power On/Off Using power cord 1. Connect the power cord to the power adapter. 2. Connect the AC power cord to a power source 3. Connect the DC power connector to your projector. Charge the projector for 4.5 hours before using it in battery mode for the first time. IMPORTANT! • Use only the bundled power adapter to change the battery pack and supply power to your LED projector. • Ensure that your LED projector is connected to the power adapter before turning it on for the first time.We strongly recommend that you use a grounded wall socket while using your LED projector on power adapter mode. • The socket outlet must be easily accessible and near your LED projector. • To disconnect your LED projector from its main power supply, unplug your LED projector from the power socket. Warning Read the following precautions for your LED projector's battery. • The battery used in this device may present a risk of fire or chemical burn if removed or disassembled. • Follow the warning labels for your personal safety. • Risk of explosion if battery is replaced by an incorrect type. • Do not dispose of in fire. • Never attempt to short-circuit your LED projector's battery. • Never attempt to dissemble and reassemble the battery. • Discontinue usage if leakage is found. • The battery and its components must be recycled or disposed of properly. • Keep the battery and other small components away from children, 8