ViewSonic PJD6230 User Guide - Page 24

Lamp Counter Display the lamp's elapsed operating time (in hours). Lamp Counter Reset Reset the lamp counter to 0 hours. Power Saving If no operation is performed for a specific period of time, the power to the projector is automatically turned off. Auto Source Automatically scan the input source. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase lamp life. High Altitude Turning on High Altitude mode operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Filter Mode When an optional air filter is attached, be sure to turn on the "Filter Mode"; otherwise, the machine can overheat and shutdown automatically. OSD Timeout Duration OSD menu stays active (at idle state by second). Option (Computer / Video Mode) Blank Screen Blank the screen temporarily, and select the screen color when this function is active. Start-up Screen Select start-up screen when the projector is powered on or when no signal is input. "User" is the screen that you captured. Screen Capture Capture the current projection screen as a start-up screen. Password Set or change the password. When the password function is added, image projection requires an entry of the preset password at power-on. DCR (Dynamic Contrast Ratio) Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR will resume to normal contrast performance. DCR will impact lamp life and system noise performance. Closed Caption (Video and S-Video sources only) Enable or Disable closed captions by selecting CC1 (closed caption 1, the most common channel), CC2 or OFF. ViewSonic 17 PJD6220/PJD6230/PJD6240