ViewSonic SC-T35 SC-T35 / SC-T45 ViewSonic Device Management (English) - Page 74
Rebooting Clients through Your Local Network
View all ViewSonic SC-T35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Using ViewSonic Device Manager Managing All Your Clients 3.4.18 Rebooting Clients through Your Local Network The Reboot feature enables you to restart multiple clients through your local network without one by one going through the restart procedure. Most of the time, adjusting client settings and updating client firmware require a restart for those changes to take effect. With this feature, you are equipped with a necessary element for remote and centralized management of a large number of endpoint devices. Rebooting a Client through Your Local Network To restart a client through your local network, please do the following: 1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and then click to select the client group to which the desired client belongs. 2. The Client list appears. 3. Click to select the desired client, and then click Command to open the Command menu. 4. Click to select Reboot. NOTE • To select more than one client, Ctrl-click to select the desired clients. WARNING • Ensure that no important tasks are performed on the selected clients. 5. On the selected client, a warning message appears to notify the user of the planned reboot and allow the user to cancel the action if necessary. 6. After completion, the Status icon will indicate the client is on-line again. 69