Viking FDW100WS Installation Instructions - Page 10
Caution, Notice
View all Viking FDW100WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation • After installing one clip for each side, push the dishwasher into the cabinet (Figure E). • Note that while pushing the dishwasher into the cabinet, water supply hose must move in the channel to the front (Figure F). • Fix the second clip (Figure G). Installation Water supply may be connected to the dishwasher in one of two ways: • With metal braided hose. • With copper tubing. CAUTION • Hot water supply line: Use minimum 3/8" O.D. copper tubing or metal braided dishwasher supply line. • Temperatures required for soldering and sweating will damage the dishwasher's water inlet valve so if any such operation is needed, keep the heat source min. 7-7/8" (20.0cm) away from the dishwasher's water inlet valve. • There should not be any sharp bends in the water line that may restrict the water flow. • Teflon tape or pipe thread compound must be used for sealing the connection. Before connecting the copper water supply line to the dishwasher, flush it with hot water to clear any foreign material. NOTICE After connections are made, turn on the water supply to check for leaks. 17 18