Viper 3305V Owner Manual - Page 13

Programming your 2-way remote control To enter programming mode: Press and hold the P button located on the back of the remote control until one long beep sounds. You can now customize the remote's response feedback. If no buttons are pressed within 5 seconds, programming mode is exited; the remote sounds 2 beeps. Beeps and Vibration, On/Off Press to select beep/vibration On or Off, or one of the below settings. Beeps/Vibrate Beeps only Response 1 beep Icon* Vibrate only 1 vibrate Beep & Vibrate 1 beep & 1 vibrate & No Beep & No 1 long beep Vibrate *Displays during programming Illumination On/Off Press to select LCD backlight illumination On/Off. The LCD backlight will illuminate when a remote button is pressed, or an alarm status page is received. LCD backlight settings On Off Programming 1 beep backlight On 2 beeps backlight Off 10 © 2012 Directed. All rights reserved.