Viper 3305V Owner Manual - Page 31
Code hopping, Owner recognition
View all Viper 3305V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Code hopping The receiver and transmitters each use mathematical formulas called algorithms to change their codes each time the transmitter is used. This technology has been developed to increase the security of the unit. The control unit knows what the next codes should be. This helps to keep the transmitter "in sync" with the control unit even if you use the remote control out of range of the vehicle. However, if the transmitter has been pressed many times out of range of the vehicle, or if the battery has been removed, it may get out of sync with the control unit and fail to operate the system. To re-sync the remote control simply press several times within range of the vehicle. The alarm will automatically re-sync and respond to the transmitters normally. Owner recognition Owner Recognition is a feature available exclusively from Directed. Using the Directed Bitwriter®, a hand-held programming tool, your dealer can program many of the system settings. The programmer makes it possible to program different settings for each transmitter that is used with the system. Then, whenever a specific transmitter is used, the system will recall the settings assigned to that transmitter. Owner Recognition lets up to four users of the system have different settings that meet their specific needs. It is almost like having four separate alarms in your vehicle, one for each user. Owner Recognition cannot be programmed without a Directed Bitwriter® and the necessary software. Check with your dealer for more information. 28 © 2012 Directed. All rights reserved.