Viper 3305V Owner Manual - Page 39
System maintenance - replacement
View all Viper 3305V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
System maintenance This system needs no specific maintenance beyond remote control battery replacement. The 2-way remote is powered by one 1.5V AAA battery. The 1-way remote is powered by two 3V, CR2016 batteries. Battery Level Indicator, 2-way The Battery Level indicator has four level indicators that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires replacement, the remote control generates a single notification chirp, and the Battery Level indicator flashes continuously. FULL REPLACE EMPTY Battery replacement, 2-way 1. Gently pull the end of the battery door away from the top of the remote control then slide the door up to expose the battery. 2. Replace the expired battery with a new battery, observing the correct polarity. 3. Reinstall door and close to latch. When power is returned, the remote control plays a melody and all icons in the LCD are displayed. Press any button on the remote to stop the melody. 1 -way remote 1. Using a small flat-head screwdriver, insert into slot located on the side of the remote control and carefully pry open the unit. 2. Turn unit over and carefully remove rear housing. Remove the battery from holder and replace with a new one. 3. Reassemble all parts and snap together. Note Verify that the battery polarity is correct when replacing. 36 © 2012 Directed. All rights reserved.