Vizio JV50PHDTV10A User Manual - Page 27
Pairing Procedure - 5 1 not working
View all Vizio JV50PHDTV10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
VIZIO JV50P HDTV10A User Manual 2.8.1 Pairing Procedure 1. Turn on the HDTV using the remote control. 2. Press the MENU button on the remote to activate the On Screen Display (OSD) which will display the Picture menu. 3. Press the button once and then press the OK button to change to the Audio menu. 4. Make sure the Speakers and Wireless Speakers selections are both On. If not, use the and buttons to correctly set them to On. (See Chapter 4 on how to navigate the OSD.) 5. Place the sub-woofer 10 ~ 12 feet away from the TV, preferably with the front, (the side with the large round hole near the top), facing the TV screen. 6. Turn-off the HDTV. 7. Plug the sub-woofer power cable into a wall socket and it will power on automatically and the power indicator light on the front will start flashing on and off*. 8. Press the CH-SEARCH, PAIRING button and while keeping is depressed turn on the HDTV using the remote. 9. When the power indicator light on the front of the sub-woofer stops flashing and remains on you have successfully paired the sub-woofer with the HDTV and you can release the button. If the sub-woofer power indicator light does not remain on then the Pairing Procedure was not successful and you must repeat steps 1 ~ 9. * When the HDTV is off the sub-woofer power indicator light will flash on and off at a slower rate to indicate that it is in Standby mode. NOTE: If the wireless speaker system receives interference from other equipment you can try correcting it by turning the HDTV off and on so the wireless system will automatically scan for a clear wireless channel. If this does not work you must locate the offending equipment turn it off or change the wireless channel it is using. Version 5/21/2007 27 www.VIZIO.com