Vizio JV50PHDTV10A User Manual - Page 28

Connecting an external Receiver/Amp

Page 28 highlights

VIZIO JV50P HDTV10A User Manual 2.9 Connecting an external Receiver/Amp 2.9.1 Using Analog Audio 1. Turn off the power to the Plasma HDTV and Receiver/Amp. 2. Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white area) audio connectors at the rear of the Plasma TV. 3. Turn on the power to the Plasma HDTV and Receiver/Amp. 4. Then press the menu button on the remote control to open the On-Screen Display (OSD) menu. 5. Press the button on the remote control to select the Audio menu. 6. Press the button on the remote to select Speakers. 7. Press the button on the remote to select Off so that the sound from the Plasma HDTV will now be routed through your Receiver/Amp system. Note: a) b) Refer to your Receiver/Amp user manual to select the corresponding audio input. The audio output is not amplified and cannot be connected directly to external speakers. Version 5/21/2007 28 www.VIZIO.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

VIZIO JV50P HDTV10A User Manual
Version 5/21/2007
28
www.VIZIO.com
2.9
Connecting an external Receiver/Amp
2.9.1
Using Analog Audio
1.
Turn off the power to the Plasma HDTV and Receiver/Amp.
2.
Using an audio cable (white and red connectors), connect the cable to the audio input
connectors on the Receiver/Amp and connect the other end to the ANALOG OUT (white
area) audio connectors at the rear of the Plasma TV.
3.
Turn on the power to the Plasma
HDTV and Receiver/Amp.
4.
Then press the menu button on the
remote control to open the On-Screen
Display (OSD) menu.
5.
Press the
button on the remote
control to select the Audio menu.
6.
Press the
button on the remote to
select Speakers.
7.
Press the
button on the remote to
select Off so that the sound from the
Plasma HDTV will now be routed
through your Receiver/Amp system.
Note:
a)
Refer to your Receiver/Amp user manual to select the corresponding audio input.
b)
The audio output is not amplified and cannot be connected directly to external speakers.