Vizio P50HDM User Manual - Page 24
Preparing the Plasma for Wall Mounting, To remove the stand base
View all Vizio P50HDM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
VIZIO P50 HDM User Guide 3.4 - Preparing the Plasma for Wall Mounting The VIZIO P50 HDM can either be kept on the base stand or mounted to the wall for viewing. If you choose to mount the P50 HDM to the wall, please follow the instructions below for removing the base stand. To remove the stand base: 1. Unplug all the cables and cords from the plasma monitor. 2. Place the plasma monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the display. 3. Remove the 6 screws on each side of the back panel of the plasma monitor located near the bottom so that the base stand can be removed (see Figure 3.4a). 4. Gently pull the stand away from the display by grasping firmly to the base. Figure 3.4a 5. Now, the display can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the display (see Figure 3.4b). Please make sure to read the directions of your specific wall mount to properly hang the P50 HDM. Figure 3.4b To find the perfect mount for the VIZIO P50 HDM, browse VIZIO's certified mount selection at www.vizioce.com or call directly, 1.888.VIZIOCE (1.888.849.4623). Version - 5/24/2005 23 www.vizioce.com