Vizio P50HDM User Manual - Page 8

1.7 - Front Panel Controls VIZIO P50 HDM User Guide Power LED - Lights green when powered on. Remote Control Sensor - This is the window that passes all of the remote signals to the sensor. Point the remote control directly at this window for the best response to the remote signal. 1.8 - Side Panel Controls Power - Switch the monitor on by pressing the button once. Press the button again to turn the monitor off. Menu - This button activates the OSD. If a sub-menu is active, pressing this button will return to the previous menu level. Select ▲/▼ - While the OSD is active, these buttons function as select controls in the OSD menus. Volume ◄/► - These buttons are used to increase or decrease the speaker volume. Input/Enter - Repeated pressing of this button steps through the input sources in the following sequence: AV1 (S-Video or video*), AV2 (SVideo or video*), Analog HD1, Analog HD2, Digital HD1, Digital HD2, and RGB. Once you have stepped through the entire sequence, you will return to the beginning. Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the OSD is not active, pressing this button will display the current input mode. *S-Video has priority. If a signal is connected to AV1 S-Video by itself or signals are connected to AV1 S-Video and AV1 Video simultaneously, then S-Video will be the only choice for AV1. If a signal is connected to AV1 Video only, then Video will be the only choice for AV1. The same input priority scheme applies to AV2. Version - 5/24/2005 7 www.vizioce.com