Vizio VBR100 VBR100 User Manual - Page 34

VIZIO VBR100 User Manual Operating Problems Disc tray opens automatically ! while playing a disc. ! ! ! The player is on and displays ! the start logo and menu, but there is no image from the ! disc. The player freezes when ! reading a CD-R or DVD-R. Solution Make sure that the disc is not dirty or defective. Make sure there are no obstacles blocking the tray. The disc may be blank or not compatible with your player. For a list of compatible discs, see "Playable discs". Press , wait five seconds and then press again to reset your player. Clean the disc if it is dirty. Press , wait five seconds, and then press again to reset your player. When you see "loading" on the screen, press , remove the disc and clean it and then try again. Audio Problems No sound. ! ! ! ! Audio pauses momentarily. ! ! You can see a picture but you ! cannot hear sound. ! ! ! ! ! Cannot switch audio. ! ! Incorrect audio type. ! ! ! ! Solution Press Volume + (Up) on the TV remote control. Press MUTE on the TV remote control to make sure that MUTE is not ON. Make sure headphones are not connected to the TV or home theater system. Check the audio connections of external devices that may be connected. This occurs normally between play list chapters or scenes. Audio momentarily pauses when your player switches between layers on a dual-layer disc. Press Volume + (Up) on the TV remote control. Press MUTE on the TV remote control to make sure that MUTE is not ON. Press AUDIO to select the audio. Make sure headphones are not connected to the TV or home theater system. Check the audio connections of external devices that may be connected. Audio may not be heard when more than four devices are connected with HDMI cables. Reduce the number of connected devices. Some discs do not let you change the audio. When connecting a home theater system using a coaxial digital cable, optical digital audio cable, or an HDMI cable, set Digital Audio Output to PCM or connect the home theater system using a standard audio cable. Depending on the connected equipment, not all audio tracks may be available if your player is connected with an HDMI cable and the TV or receiver does not support the audio track selected. Sound effects are only sent to the audio outputs (HDMI jack or the DIGITAL AUDIO OUT jack) if Bitstream Mixed is selected from the audio menu. Dolby Digital Plus, Dolby TruHD, and DTS-HD cannot be output from the DIGITAL AUDIO OUT jacks. Instead, these BD audio tracks, if present, are output as Dolby Digital or DTS Digital Surround bitstreams. (The HDMI still outputs Dolby Digital Plus, Dolby TruHD, and DTS-HD bitstreams, as long as the HDMI receiver supports these formats). Some audio tracks may be changed prior to being sent to the audio jack, depending on the Audio settings and the receiver capabilities. For instance, selecting "Bitstream Mixed" will cause the BD player to output a (remixed) DTS stream, regardless of the audio track selected. 34 www.VIZIO.com