Vizio VBR100 VBR100 User Manual - Page 35
Video Problems, Solution, VIZIO VBR100 User Manual, Version 8/19/2009
UPC - 845226002427
View all Vizio VBR100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
VIZIO VBR100 User Manual Video Problems Video is not in high-definition. ! ! ! ! Video pauses momentarily. ! ! 4:3 aspect ratio picture ! expands left and right or screen size is incorrect. ! ! The screen is black. ! ! ! ! ! PIP does not work with a ! Blu-ray Disc. Cannot change the viewing ! angle. Power is ON but there is no ! image on the screen. ! ! The picture is distorted. ! ! Solution Connect the TV using HDMI or Component video. Composite video cannot output in high-definition. If you have connected the TV to the HDMI or component video jacks, make sure that you have selected the correct resolution in the setup menu. Almost all commercial DVDs (but not Blu-ray discs) limit component video resolution to 480p. Upscaling of commercial DVD content is only possible over HDMI. Your TV is not capable of displaying HD video. Consult your TV documentation. This occurs normally between play list chapters or scenes. Video momentarily pauses when your player switches between layers on a dual-layer disc. Use the TV to change the aspect ratio. See the documentation that came with the TV. If the TV is connected to the component video jacks, set TV Aspect to 4:3 Pan & Scan. If the TV is connected to HDMI, set the TV Aspect to 16:9. Make sure the power is ON. Press the input or source button on the TV remote control to select the input source for your player. Check the connections of external devices that may be connected. Make sure that the disc is not dirty or defective. Press , wait five seconds, and then press again to reset your player. Make sure that the Blu-ray disc allows PIP. See the documentation that came with the disc. Not all discs or scenes are recorded with multiple viewing angles. Check the connections of external devices that may be connected. Adjust brightness, contrast, or backlight on the TV. Press the input or source button on the TV remote control to select the input source for your player. Press , wait five seconds, and then press again. Check the video cables to make sure they are securely connected. Version 8/19/2009 35 www.VIZIO.com