Vtech InnoTab 3S The Wi-Fi Learning Tablet Pink User Manual - Page 31

CARE & MAINTENANCE Using the InnoTab® 3S Touch Screen and Stylus: • Use only enough pressure to operate the game. Too much pressure may damage the touch screen. • Do not use the stylus if it is broken. • Do not use any other stylus on the touch screen other than the InnoTab® 3S stylus. • Put the stylus back in the stylus holder when not in use. Cleaning the InnoTab® 3S Touch Screen • Slightly dampen a soft, lint-free cloth with a little water and wipe the screen to loosen dirt. • Using a clean and dry cloth, wipe the screen dry. Repeat these two steps as needed. Cleaning the InnoTab® 3S Cabinet • Keep your InnoTab® 3S clean by wiping it with a slightly damp cloth. Never use solvents or abrasives. Backup Battery Replacement • Make sure the tablet is turned off. • Locate the backup battery cover on the back of the tablet, then open it with a screwdriver as shown in image 6. • Insert 1 3V CR2032 battery in the battery compartment with the "+" side facing up as shown in image 7. 6 • Make sure to replace the backup battery cover. 7 28