Vtech InnoTab 3S The Wi-Fi Learning Tablet Pink User Manual - Page 34
If your, does not respond to an inserted cartridge, please carefully, try the following, cleaner
View all Vtech InnoTab 3S The Wi-Fi Learning Tablet Pink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
CARE & MAINTENANCE Wi-Fi network is available, but the connection failed. When using the rechargeable battery packs, the console suddenly turns off without prior "Low Battery" warning. The selected network is not configured properly or authentication is required. There is uneven charge storage among the cells in the battery packs. Make sure the network is configured properly and there is no firewall blocking Internet access. If a password is needed, make sure the correct password is entered with the appropriate uppercase/lowercase letters indicated. Charge the rechargeable battery packs for 24 hours (keep charging even after the battery charging indicator light stops flashing). The battery charging indicator light does not come on. The AC Adapter is not properly connected, or the tablet has been left on. Inspect the AC adapter. Make sure that the adapter is securely connected to the InnoTab® and plugged in to the wall outlet. Make sure the tablet is turned off. The green light blinks very quickly when attempting to charge the unit. The rechargeable Check that the rechargeable batteries batteries are not are correctly installed in the tablet. able to charge Make sure the connector pins on the properly. InnoTab® and the metal contacts on the battery packs are clean and free of debris. If problem persists after checking the above, unplug the AC adapter from the AC adapter jack. Wait for 10 seconds before plugging the AC adapter back in. If your InnoTab® 3S does not respond to an inserted cartridge, please carefully try the following: • Remove all batteries and unplug all wiring. • Use a cotton swab dipped in rubbing alcohol or an alcohol-based window cleaner to gently clean the contact area of the cartridge slot. • If necessary, dry all the clean contact areas with a soft, lint-free cloth. • Please make sure that all parts are completely dry before restoring electricity. 31