Vtech Kidizoom Plus User Manual - Page 5

Getting Started Supported File Formats: Photo: JPEG Video: Kidizoom PlusTM Motion JPEG Supported Hardware: A/V cable for TV connection (included) USB cable for PC connection (included) SD and SDHC memory cards (not included) with a memory size of 32MB to 16GB GETTING STARTED BATTERY INSTALLATION Note: Adult assembly is required for battery installation. Tools required for battery installation: Phillips screwdriver (not included). • Make sure the camera is turned OFF. • Locate the battery covers on the bottom of the camera. Loosen the screws using a Phillips screwdriver and remove the battery covers. • Install 4 new "AA" batteries (2 on each side) as illustrated below. (the use of new, alkaline batteries is recommended for maximum performance). • Replace the battery covers and tighten the screws. Do not over-tighten the screws. Note: If your Kidizoom PlusTM is not working properly after the batteries have been replaced, press the Reset Button and then turn the camera back on. BATTERY NOTICE • Install batteries correctly observing the polarity (+, -) signs to avoid leakage. • Do not mix old and new batteries. • Do not mix batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). • Remove the batteries from the equipment when the unit will not be used for an extended period of time • Always remove exhausted batteries from the equipment. • Do not dispose of batteries in fire. • Do not attempt to recharge ordinary batteries. • The supply terminals are not to be short-circuited. • Only batteries of the same and equivalent type as recommended are to be used.