Vtech VT 2417 User Manual - Page 6
Getting Started - battery
UPC - 735078005281
View all Vtech VT 2417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started Setup CAUTION: To reduce the risk of fire or injury, read and follow these instructions: 1. Use only the VTECH battery supplied or equivalent. 2. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 3. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns. 4. Do not dispose of the battery in a fire. The cell may explode. Connecting to phone line Plug one end of the telephone line cord into the jack on the bottom of the Base Unit. Plug the other end of this cord into the wall jack. Checking for dial tone After the battery pack is charged, pick up the Handset and press the PHONE key. The IN USE indicator should light up, and you should hear a dial tone; if not, see IN CASE OF DIFFICULTY. Tone/Pulse Selection See OPERATING INSTRUCTIONS for details. CAUTION: Use only the Vtech power supply provided with your VTECH. IMPORTANT: For best performance the VT2418 should be installed as follows: In an elevated location, in the center of the room. with no obstructions nearby. In a location that is away from other electrical appliances such as microwave ovens, personal computers, or televisions. 5