Waring MX1200XTX Instruction Manual - Page 11

REMOVING THE SOUND ENCLOSURE To remove the sound enclosure, unplug your blender and follow these steps: 1. Open sound enclosure and remove blender container. 2. Remove front portion of sound enclosure by disengaging both sides at the pivot point. 2. Remove rubber jar pad. 4. Remove 3 screws from blender base and remove sound enclosure. TURNING OFF YOUR BLENDER Whether your blender is in standby mode, new program mode, or the motor is running, pressing the On/Off button will stop the unit from running and will turn the power off. The LCD display will turn off. NOTE: All programs and current settings will be restored next time you turn unit on. CLEANING AND SANITIZING INSTRUCTIONS THE CONTAINER MUST BE CLEANED AND DRIED AFTER EACH USE OF THE BLENDER ACCORDING TO THE FOLLOWING INSTRUCTIONS. FAILURE TO DO SO MAY ALLOW RESIDUES OF PROCESSED MATERIAL TO COLLECT ON THE INTERNAL SEALS OF THE BLADE ASSEMBLY, RENDERING THEM INEFFECTIVE. • Wash, rinse, sanitize and dry container prior to initial use and whenever it will not be used again within a period of 1 hour. • Wash and rinse container after each use. • Clean and sanitize motor base prior to initial use and after each use. • Washing solutions based on non-sudsing detergents and chlorine-based sanitizing solutions having a minimum chlorine concentration of 100 PPM are recommended. The following washing, rinsing, and sanitizing solutions, or their equivalents, may be used. SOLUTION Washing Rinsing Sanitizing PRODUCT DILUTION IN WATER Diversy Wyandotte 4 Tablespoons/ Diversol BX/a or CX/A 3.8 Litres Plain Water Clorox® Institutional Bleach 1 Tablespoon/ 3.8 Litres TEMPERATURE Hot 46˚C Warm 35˚C Cold 10 - 21˚C • In repetitive batch-processing applications, frequent cleaning of the container will prolong the life of the blade assembly. In no case should actual running time between cleanings exceed ½ hour. • Do not use container to store processed foods or beverages. 11