Waring MX1200XTX Instruction Manual - Page 9

DRINK COUNTER Your reprogrammable blenders are equipped with a drink counter to keep track of daily drink totals and total drink counts for your machine. To display the counts, hold program buttons & simultaneously for 3 seconds. Your display will read: DAILY COUNT XXXX TTL COUNT XXXXX Daily Count will display the numbers of drinks mixed per day. Total Count is the accumulation of all drinks made since first use of the blender. The Daily Count can be reset by holding in Program buttons & simultaneously for 3 seconds then, pressing ON/OFF button for 3 seconds. Daily Count will reset to zero and Total Count will remain unchanged. If Total Count needs to be reset, call your nearest Waring authorized service facility for information. NOTE: Use of the Pulse features will not add to the daily or total drink counts. Resetting Thermal Protection • T he blender you have purchased is equipped with an Automatic Reset Switch to protect the motor from overheating. • If your blender stops running under heavy use, turn the power switch to the STANDBY or OFF position and unplug the power cord. Empty the blender container of all its contents and allow approximately 5 minutes for the motor to cool down. • Plug the power cord back into the outlet and continue blending. IMPORTANT - HOT BLENDING INSTRUCTIONS To minimize the possibility of being scalded when blending hot materials, the following precautions and procedure must be observed. • Hot materials are those that are 100°F (38°C) or hotter. • Limit the amount of materials processed to 1 pint. • Completely remove the center portion of the two-piece container lid before starting motor (this will allow venting of the rapidly heated and expanded air inside the container when blender is running). • Always start blending on lowest speed setting, and then progress to desired speed. • Never stand directly over blender when it is being started or while it is running. 9