Waring MX1200XTX Instruction Manual - Page 6
Read Press Any Button To Blend.
View all Waring MX1200XTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. The motor speed can be adjusted by pressing the or Speed buttons. Speed ranges from 15% to 100%. 100% 50% 15% 20,000 RPM 10,000 RPM 3,000 RPM The Speed Up button will increase the motor speed display in 1% increments and the Speed Down button will decrease the motor speed display in 1% increments. Holding down either button will quickly scroll through speeds. Using the Speed Up and Speed Down buttons, set desired motor speed. If no speed is selected, motor will default to 100%. NOTE: The motor does not run at the newly set speed until the Start/ Stop button is pressed. If Start/Stop button is not pressed within 5 seconds, the new speed setting will be stored for next use and the blender will return to standby mode; the display will once again read "PRESS ANY BUTTON TO BLEND". 5. Press Start/Stop button to run the blender. Blender will run continuously at the set speed. The LCD will display the motor speed in percentage. Default speed (percentage) is at 100%. Motor speed can be changed while blender is running by simply pressing Speed Up or Speed Down button. 6. To stop continuous blending operation, press Start/Stop button or press any of the program buttons. PULSE FEATURES Your unit comes equipped with two Pulse options: Normal Pulse and Maximum Pulse . Note: The Pulse buttons are momentary switches - once released, the unit will shut off. 1. To use Max Pulse option, press the button. This will run the motor at 150% speed. The LCD will read "MAX PULSE SPEED: 150%". 2. To use Normal Pulse option, press the button. This will run the motor at 100% speed. The LCD will read "NORM PULSE SPEED: 100%". 3. The blender allows you to set the pulse to your desired speed. While blending at Normal Pulse speed, the motor can be adjusted. To do this, hold the Normal Pulse button and press Speed Up or Speed Down button to adjust the blending speed. The LCD will show the setting speed and motor speed will change. NOTE: The speed can be set from 15% to 100%. Once the Pulse button is released, the motor will shut off and the blender will return to standby mode. The changed pulse speed will be stored in memory to replace the default speed at 100%. 6