Weber Summit Gold D LP Owner Manual - Page 31
Reinstall control panel
View all Weber Summit Gold D LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Gas Instructions Reinstall control panel Parts required: control panel, screws, and burner control knobs. Place the control panel back onto the control panel brackets on either side of the front of the cooking box. Line up screws with screw holes on both the control panel and control panel brackets. Tighten screws. Reinstall burner control knobs & igniter wires (if necessary). Place corresponding control knobs down onto the valve stems. From the underside of the control panel, replace the two wires (1, 2) of each igniter. -+ -+ (1) a c ef bd (2) a = Blue Tab with Black Wire b = Yellow Tab with Black Wire c = White Tab with Black Wire d = Solid White Wire e = Green Tab with Black Wire f = Solid Red Wire C-5
C-5
Gas
Instructions
Reinstall control panel
Parts required: control panel, screws, and burner control
knobs.
Place the control panel back onto the control panel
brackets on either side of the front of the cooking box.
Line up screws with screw holes on both the control panel
and control panel brackets. Tighten screws.
Reinstall burner control knobs & igniter wires (if necessary).
Place corresponding control knobs down onto the valve
stems. From the underside of the control panel, replace the
two wires
(1, 2)
of each igniter.
a = Blue Tab with Black Wire
b = Yellow Tab with Black Wire
c = White Tab with Black Wire
d = Solid White Wire
e = Green Tab with Black Wire
f = Solid Red Wire
-
+
b
-
+
a
c
d
e
f
(1)
(2)