Weber Summit Gold D LP Owner Manual - Page 47
Side Burner Troubleshooting
View all Weber Summit Gold D LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Side Burner Troubleshooting Problem Side Burner does not light. Check Is gas supply off? Cure Turn supply on. Flame is low in HIGH position. Is the fuel hose bent or kinked? Straighten hose. Push button ignition does not work. Does burner light with a match? If match lights burner, checkigniter (see below). Side Burner maintenance ƽ WARNING: All gas controls and supply valves should be in the OFF position. (1) 1) Igniter Wire 2) Venturi/Burner 3) 1/8 to 3/16 inch gap between electrode and burner (3) (2) Make sure wire is connected between igniter and electrode. Check that igniter lock nut is tight. Note: If the igniter works loose, carefully tighten the igniter lock nut with an adjustable wrench or pliers. Adjust igniter electrode to burner. Gap should be 1/8 to 3/16 inch from tip of electrode to burner. Spark should be a white/blue color, not yellow. Side Burner Grate Side Burner Cap Side Burner Ring & Head Igniter Electrode Control Knob D-14