Weber Summit Gold D LP Owner Manual - Page 51
WARNING: After reinstalling the gas lines,
View all Weber Summit Gold D LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Maintenance 11. Pull manifold assembly out from the manifold frame. 13. Remove the Crossover® tube. 14. Pull the selected burner(s) tube(s) from manifold frame and replace with a new burner tube. 15. To reinstall the manifold assembly, reverse steps 7 through 14. ƽCAUTION: The burner openings (1) must be positioned properly over the 12. Lift and twist the burner assembly slightly, to separate valve orifices (2). the Crossover® tube (a) from the burners (b). (2) (b) (b) (a) (1) Check proper assembly before fastening manifold in place. ƽWARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the grill. (See, "Check for gas leaks.") E-3
E-3
Maintenance
12.
Lift and twist the burner assembly slightly, to separate
the Crossover
®
tube (a) from the burners (b).
11.
Pull manifold assembly out from the manifold frame.
(a)
(b)
(b)
13.
Remove the Crossover
®
tube.
14.
Pull the selected burner(s) tube(s) from manifold
frame and replace with a new burner tube.
(2)
(1)
15.
To reinstall the manifold assembly, reverse steps
7 through 14.
±
CAUTION: The burner openings (1) must be
positioned properly over the
valve orifices (2).
Check proper assembly before fastening manifold
in place.
±
WARNING: After reinstalling the gas lines, they
should be leak checked with a soap and water
solution before using the grill. (See,
“
Check for
gas leaks.
”
)