Weider 110 User Manual - Page 5

Assembly - weight set

Get Weider 110 PDF manuals and user guides View all Weider 110 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

ASSEMBLY Make Things Easier for Yourself This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two persons. • For help identifying small parts, use the PART IDENTIFICATION CHART. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. The following tools (not included) are required for assembly: • Two adjustable wrenches • One rubber mallet • One standard screwdriver • One Phillips screwdriver • Lubricant, such as grease or petroleum jelly, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before assembling this product, make sure you understand the information in the box above. Press three 38mm Square Inner Caps (21) into each Upright (1). Attach the Crossbar (3) to the two Uprights (1) with four M8 x 55mm Bolts (18), four M8 Washers (16), and four M8 Nylon Locknuts (17). Do not tighten the Locknuts yet. Make sure that the decal on the Crossbar is oriented as shown. 2. Press a 38mm Square Inner Cap (21) into the Front Leg (8). Press two 38mm Square Inner Caps into the Stabilizer (49). Orient the Stabilizer (49) with the indents around the holes on the bottom. Attach the Front Leg (8) to the Stabilizer with two M8 x 50mm Carriage Bolts (52) and two M8 Nylon Locknuts (17). Attach the Front Leg (8) to the Frame (2) with two M8 x 40mm Carriage Bolts (46), two M8 Washers (16), and two M8 Nylon Locknuts (17). Do not tighten the Locknuts yet. 1 21 1 16 17 16 18 Decal 18 21 21 3 18 21 21 1 16 17 21 2 46 21 2 16 8 17 17 17 21 Indents 52 49 21 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Before beginning assembly, carefully read the
following information and instructions:
•
Assembly requires two persons.
•
For help identifying small parts, use the
P
ART
IDENTIFICA
TION CHART
.
•
Tighten all parts as you assemble them, unless
instructed to do otherwise.
•
As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
The following tools (not included) are required
for assembly:
•
Two adjustable wrenches
•
One rubber mallet
•
One standard screwdriver
•
One Phillips screwdriver
•
Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight bench can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
ASSEMBLY
5
1.
Before assembling this product, make sure
you understand the information in the box
above.
Press three 38mm Square Inner Caps (21) into
each Upright (1).
Attach the Crossbar (3) to the two Uprights (1) with
four M8 x 55mm Bolts (18), four M8 Washers (16),
and four M8 Nylon Locknuts (17).
Do not tighten
the Locknuts yet. Make sure that the decal on
the Crossbar is oriented as shown.
2.
Press a 38mm Square Inner Cap (21) into the
Front Leg (8). Press two 38mm Square Inner
Caps into the Stabilizer (49).
Orient the Stabilizer (49) with the indents around
the holes on the bottom. Attach the Front Leg (8)
to the Stabilizer with two M8 x 50mm Carriage
Bolts (52) and two M8 Nylon Locknuts (17).
Attach the Front Leg (8) to the Frame (2) with two
M8 x 40mm Carriage Bolts (46), two M8 Washers
(16), and two M8 Nylon Locknuts (17).
Do not
tighten the Locknuts yet.
2
1
21
21
21
17
2
46
16
21
8
17
17
52
Indents
21
49
21
3
17
Decal
16
16
18
18
18
16
17
1
21
21
1
21