Weider 1200 English Manual - Page 13
Seat Assembly
 |
View all Weider 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
18. Route the Long Cable (23) over the 90mm Pulley (15). Tighten the M10 x 45mm Bolt (83) and the 18 M10 Nylon Locknut (21). 21 Bracket 15 83 23 19. Attach the Long Cable (23) to the Small "U"- 19 bracket (67) with an M8 Nylon Locknut (3) and an M8 Washer (8). See the inset drawing. Do not overtighten the Nylon Locknut; it should be threaded onto the end of the Cable so that two threads are showing past the Nylon Locknut. 23 3 Attach the Small "U"-bracket (67) to the Weight 67 Tube (63) with an M8 x 45mm Bolt (72) and an 72 M8 Nylon Locknut (3). 8 63 3 23 8 3 67 Seat Assembly 20 20. Attach the Backrest (41) to the Front Upright (42) with two M6 x 65mm Screws (43) and two M6 Washers (10). 41 43 10 42 10 43 13
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
-
20
-
21
-
22
-
23
-
24
 |
 |
13
18
23
Bracket
15
83
21
20
41
10
10
43
43
23
3
72
63
8
3
67
42
19
18. Route the Long Cable (23) over the 90mm Pulley
(15). Tighten the M10 x 45mm Bolt (83) and the
M10 Nylon Locknut (21).
19. Attach the Long Cable (23) to the Small “U”-
bracket (67) with an M8 Nylon Locknut (3) and an
M8 Washer (8).
See the inset drawing. Do not
overtighten the Nylon Locknut; it should be
threaded onto the end of the Cable so that
two threads are showing past the Nylon
Locknut.
Attach the Small “U”-bracket (67) to the Weight
Tube (63) with an M8 x 45mm Bolt (72) and an
M8 Nylon Locknut (3).
23
67
3
20. Attach the Backrest (41) to the Front Upright (42)
with two M6 x 65mm Screws (43) and two M6
Washers (10).
Seat Assembly
8