Weider 235 Uk Manual - Page 7

3. Attach the Front Leg (8) to the Frame (2) with two M8 x 43mm Carriage Bolts (29), two M8 Washers 3 (12), and two M8 Nylon Locknuts (13). Do not tighten the Nylon Locknuts yet. 29 2 12 13 8 4. Apply some of the included grease to an M10 x 4 55mm Bolt (30). Attach the Frame (2) to the upper set of holes in the bracket on the Crossbar (3) with the Bolt and an M10 Nylon Locknut (25). Do not overtighten the Nylon Locknut; the Frame must pivot easily. Tighten the Adjustment Knob (23) into the bracket on the Crossbar (3) and the Frame (2). 23 3 25 2 Grease 30 5. Apply grease to the barrel of an M10 x 52mm Bolt 5 Set (24). Attach the Leg Lever (4) to the bracket on the Front Leg (8) with the Bolt Set. Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg. 24 Grease 4 24 8 6. Insert the two Long Pad Tubes (10) into the Leg 6 Lever (4). Slide two Large Foam Pads (18) onto each Long Pad Tube. 18 4 10 18 18 10 18 7