Weider 235 Uk Manual - Page 9

10. Attach the Right Barbell Hook (32) to the right Upright (1) with an M8 Zinc Washer (35) and an M8 Zinc Nylon Locknut (36). Do not overtighten 10 36 35 the Nylon Locknut; the Barbell Hook must pivot easily. 32 Attach the Left Barbell Hook (33) to the left Upright (1) with an M8 Zinc Washer (35) and an M8 Zinc Nylon Locknut (36). Do not overtighten the Nylon Locknut; the Barbell Hook must pivot freely. 33 35 36 11. Attach a Bumper (45) to the left Upright (1) with a 11 Wing Knob (47). Press a Bumper Cover (46) onto the Bumper. Repeat this step for the other side of the weight bench. 45 46 47 1 12. Identify the Left Fly Arm (40), which has a welded pivot tube on the indicated side. Attach the Left Fly Arm to the left Upright (1) with an M10 x 125mm Bolt (51), an M10 Washer (26), and an M10 Nylon Locknut (25). Insert a Short Pad Tube (44) into the Left Fly Arm (40). Slide a Small Foam Pad (43) onto the Short Pad Tube, and press a 19mm x 1mm Round Inner Cap (53) into the Short Pad Tube. Then, slide a Spacer (42) onto the Left Fly Arm. Repeat this step for the other side of the weight bench. 13. Attach the Curl Pad (48) to the Curl Post (49) with two M6 x 16mm Screws (21). 12 51 43 53 40 13 26 25 44 1 Pivot Tube 42 14. Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENTS, starting on page 10. 48 21 49 9