Weider 30ct English Manual - Page 20
Vkr Assembly
View all Weider 30ct manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
43. Press two 3/4" Round Inner Caps (34) into each 43 Pad Tube (28). Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube. Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end of the Pad Tube. 36 30 30 34 28 34 29 VKR ASSEMBLY 44. Locate and open the parts bag labeled "VKR ASSEMBLY." Press two 1 1/2" Square Inner Caps (32) into the ends of the Left and Right VKR Arms (79, 80). Attach the Left and Right VKR Arms (79, 80) to the VKR Upright (74) with two 5/16" x 3" Bolts (75) and two 5/16" Nylon Locknuts (3). 45. Attach the VKR Backrest (77) to the VKR Upright (74) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Washers (10). Attach a VKR Armrest (78) to the Right VKR Arm (80) with two 1/4" x 2" Machine Screws (81) and two 1/4" Washers (10). Attach a VKR Armrest (78) to the Left VKR Arm (79) in the same manner. 44 75 80 32 45 78 74 79 32 74 80 10 10 77 81 78 3 43 10 79 46. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on page 21 of this manual. Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on pages 25 and 26 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTENANCE on page 24. 20