Weider Club C4800 English Manual - Page 12

13. Attach a Seat Arm (26) to the Sliding Seat Frame 13 (8) with two M6 x 35mm Bolts (83) and two M6 Nylon Locknuts (102). Repeat with the other Seat Arm (26). 26 102 8 14. Press a 50mm Thick Angled Cap (109) into the top of the Rear Press Arm (13). Press a 50mm Angled Cap (108) into the top of the Front Press Arm (14). Lubricate an M10 x 77mm Bolt (106) with grease. Attach the Rear Press Arm (13), which has a hole in the lower area, to the Leg Press Base (3) with the Bolt and an M10 Nylon Locknut (101). Do not overtighten the Locknut; the Press Arm must be able to pivot easily. Attach the Front Press Arm (14) to the Leg Press Base (3) in the same manner. 83 26 14 13 3 101 15. Lubricate wo M10 x 80mm Bolts (110) with 15 grease. Attach the two Leg Press Brackets (16) to the Press Arms (13, 14) with the Bolts and two M10 Nylon Locknuts (101). Do not tighten the Locknuts yet. Make sure the warining decal is in the location shown. 109 108 14 Hole 106 Lubricate 13 110 16 14 101 16 Warning Decal 12