Weider Club C4800 English Manual - Page 18
Trap 68 to the Rear Press Arm 13 with an M10
View all Weider Club C4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
39. Wrap the Lower Short Stack Cable (64) around a 39 90mm Pulley (39). Attach the Pulley and a Short Cable Trap (48) to the Base (1) with an M10 x 45mm Bolt (51). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 1 64 51 48 39 40. Wrap the Lower Short Stack Cable (64) under a 90mm Pulley (39). Attach the Pulley to the Base (1) with an M10 x 45mm Bolt (51), an M10 Washer (99), and an M10 Nylon Locknut (101). 41. Locate the Weight Plate (20) that is attached to the bottom of the Bottom Weight (21). See the inset drawing. Attach the end of the Lower Short Stack Cable (64) to the Weight Plate (20) with an M10 x 45mm Bolt (51) and an M10 Nylon Locknut (101). 40 64 39 101 1 99 51 41 51 20 101 21 64 42. Identify the Leg Press Cable (65). Attach the Cable to the Leg Press Base (3) with an M8 x 67mm Shoulder Bolt (90), two M8 Washers (100), and an M8 Nylon Locknut (87). 42 100 87 43. Wrap the Leg Press Cable (65) around a 100mm Pulley (38). Attach the Pulley and a Large Cable Trap (68) to the Rear Press Arm (13) with an M10 x 92mm Bolt (55), an M10 Washer (99), and an M10 Nylon Locknut (101). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley. 43 65 99 101 18 90 100 65 3 55 68 38 13