Weider Club C4800 English Manual - Page 27

Converting The Butterfly Arms - exercise

Page 27 highlights

ADJUSTING THE SEAT To adjust the height of the Seat (30), loosen the "T"-handle (59) and pull it out as far as it will go. Move the Seat to the desired height and reengage 30 the "T"-handle into the Seat Post (27). Fully tighten the "T"-handle. 59 CONVERTING THE BUTTERFLY ARMS To use the Butterfly Arms (11, 12) as fly arms, insert the Butterfly Pins (78) into the inner holes in the Butterfly Frame (10) (see inset drawing A). To use the Butterfly Arms (11, 12) as press arms, insert the Butterfly Pins (78) into the outer holes in the Butterfly Frame (10) and the tabs on the Butterfly Arms (see inset drawing B). A 78 Make sure that the Butterfly Pins (78) are fully inserted into the same holes on both sides of the 11 Butterfly Frame (10) before performing any exer- cises. 27 78 10 78 11 12 B 78 11 ATTACHING THE CURL PAD To use the Curl Pad (29), first engage the leg lever lock (see USING THE LEG LEVER LOCK on the previous page.) Slide the Curl Post (not shown) onto the Leg Lever (7). Tighten the Curl Post "T"-handle (94) into the Curl Post and the Leg Lever. 29 94 7 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

A
B
78
78
11
11
27
27
29
94
7
ADJUSTING THE SEAT
To adjust the height of the Seat (30), loosen the
“T”-handle (59) and pull it out as far as it will go.
Move the Seat to the desired height and reengage
the “T”-handle into the Seat Post (27). Fully tighten
the “T”-handle.
30
ATTACHING THE CURL PAD
To use the Curl Pad (29), first engage the leg lever
lock (see USING THE LEG LEVER LOCK on the pre-
vious page.) Slide the Curl Post (not shown) onto the
Leg Lever (7). Tighten the Curl Post “T”-handle (94)
into the Curl Post and the Leg Lever.
10
12
11
78
78
CONVERTING THE BUTTERFLY ARMS
To use the Butterfly Arms (11, 12) as fly arms, insert
the Butterfly Pins (78) into the inner holes in the
Butterfly Frame (10) (see inset drawing A).
To use the Butterfly Arms (11, 12) as press arms,
insert the Butterfly Pins (78) into the outer holes in the
Butterfly Frame (10) and the tabs on the Butterfly
Arms (see inset drawing B).
Make sure that the Butterfly Pins (78) are fully
inserted into the same holes on both sides of the
Butterfly Frame (10) before performing any exer-
cises.
59