Weider Pro 130 User Manual - Page 7

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. M4 x 12mm Screw (33) M4 x 16mm Self-tapping Screw (25) M6 Washer (36) M6 x 16mm Screw (15) M8 Nylon Locknut (35) M8 x 35mm Bolt (29) M8 x 67mm Bolt (34) M10 x 70mm Bolt (19) M8 x 72mm Carriage Bolt (21) M10 Nylon Locknut (18) M10 x 80mm Bolt (17) 81 M8 Washer (32) M10 x 122mm Bolt (20)