Weider Pro 9545 English Manual - Page 12
FldflIC 80
![]() |
View all Weider Pro 9545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
24. Route the Long Cable (45) under a 3 1/2" Pulley 24 (12). Attach the Pulley and two Pulley Covers (13) to the "U" bracket on the Stabilizer (69) with the 3/8" x 2" Bolt (38) and a 3/8" Jam Nut (2). Make . sure that the Pulley Covers are turned so the wide tabs are positioned as shown. / 13 wide Tab - 38 - i - 12 13 ' 2 ° 69 25. Feed the Long Cable (45) under the Weights (46). Refer to the CABLE DIAGRAM on page 23 to see how the Cable should be routed. Route the Long Cable (45) under a 3 1/2" Pulley (12). Attach the Pulley and two Pulley Covers (13) to the bracket on the Base (43) with a 3/8" x 1 3/4" Bolt (14) and a 3/8" Jam Nut (2). Make sure that the Pulley Covers are turned so the wide tabs are positioned as shown. Feed the Long Cable (45) over the lower 4 1/2" Pulley (85). 26. Route the Long Cable (45) under a 3 1/2" Pulley (12). Attach the Pulley and two Pulley Covers (13) 1'0 the bitfm of Ulu FldflIC (80) with fne 3/8" x 4" Bolt (64) and a 3/8" Nylon Locknut (27). Make sure that the Pulley Covers are turned so the wide tabs are positioned as shown. . e 25 85 14 • . I • 26 ((( 45 ♦ / • f • . 13 46 12 . 13 2 45 Wide Tab I1it m_ k64 13 12 a Wide Tab . 80 13 27 45 Wide Tab 27. Route the Long Cable (45) up around a 3 1/2" Pulley (12). Attach the Pulley and two Pulley Covers (13) to the indicated side of the Press Arm (28) with a 3/8" x 3 1/4" Bolt (5) and a 3/8" Jam Nut (2). Make sure that the Pulley Covers are turned so the wide tabs are positioned as shown. 27 28 13 12 . 45 2 Wide Tab 13 . • . 12
![](/manual_guide/products/weider-pro-9545-english-manual-b1d8987/12.png)